Biaxial 90° Tee Rosette Strain Gauges

Biaxial 90° Tee Rosette Strain Gauges

Details
Biaxial 90°Tee Rosette Strain Gauges Model: BB series Carrier Material: Phenolic Aldehyde/Polyimide/Epoxy Measuring Material: Foil (nickel copper alloy, Constantan or Karma) Resistance: 350-1000 Ohm Operational temperature -20~+80℃, Temperature compensation range +10~+80℃ Four (4) solder points,long terms...
Category
Shear Strain Gauges
 
Send Inquiry
Description
Technical Parameters

Biaxial 90° Tee Rosette Strain Gauges 

 

Biaxial 90° Tee Rosette Strain Gauges BB Series referred to as 90° rosettes, these strain gauges are composed of two measuring elements oriented perpendicularly with each other. They are used in applications where the principal strain directions are known. One measuring element is aligned with the direction of a strain. 90° Rosette strain gauges can be configured into half bridge circuits. Full bridge circuits can also be created by using multiple rosettes.

 

Model: BB series
Carrier Material: Phenolic Aldehyde /Polyimide/Epoxy
Measuring Material: Foil(nickel copper alloy, Constantan or Karma)
Resistance: 350-1000 Ohm

Elements: 2

Terminals: 3 or 4
Operational temperature -30~+80℃, Temperature compensation range +10~+80℃
Three (3) solder points, long terms stable.

 

MODEL   Grid Size
(mm)
Base Size (mm) Grid Distance (mm)
BF( BA/BE)350-2BB 2.6×3 .3 6.3×7 .6 /
BF( BA/BE)350-3BB 3.0×3 .1 6.8×7 .6 /
BF( BA/BE) 1000-2BB 2.6×3 .0 6.3×7 .5 /
BF( BA/BE) 1000-3BB 3.0×3 .1 6.8×7 .6 /
BF( BA/BE)350-3BB-A 3.0×3 .1 6.8×7 .6 /
BF( BA/BE) 1000-3BB-A 3.0×3 .1 6.8×7 .6 /

 

Applications:

Bending Beams: Structural components like I-beams, cantilevers, or machine frames.

Axial Load Monitoring: Columns, struts, or tie rods under tension/compression.

Pressure Vessels: Measuring hoop and axial stresses in pipelines or tanks.

Automotive Testing: Suspension arms, chassis components, or brake pedals.

Industrial Machinery: Presses, cranes, or robotic arms subjected to flexural loads.

 

Example Use Case:
Monitoring bending stress in a robotic arm:

Install BB Series gauges at 90° on the top and bottom surfaces of the arm.

Connect to a data acquisition system in half-bridge mode.

Measure real-time bending strain during operation to optimize payload capacity and prevent overload.

 

When to Use BB vs. HA Series:

BB Series (90°): Best for bending, axial loads, or applications requiring temperature compensation in a half-bridge setup.

HA Series (45°): Optimized for shear/torsional strain measurement.

For exact BB Series specifications, consult the manufacturer's datasheet or technical support.

 

Note: Other models and sizes are available according to customer request

MOQ: 20PCS 

 

Hot Tags: Biaxial 90° Tee Rosette Strain Gauges, China, manufacturers, suppliers, factory, made in China

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!